Concrete fire pits (actually, concrete anything) seem to be all the rage these days. Sure, they're super chic but not everyone has the space and/or the perfect spot in their garden to place one permanently. If you fall into this group, here's an easy DIY project for you. This tabletop concrete fire bowl is totally portable and it runs on easy-to-find, no-mess gel fuel. Plus, concrete is a super affordable material, so you can make one for every spot in your garden! This would also make a terrific housewarming gift for anyone who's into that modern industrial look.
credit: Maya Marin
It looks like you may be having problems playing this video. If so, please try restarting your browser.
Close
Posted by eHow
12,668,133 Views
Posted by eHow
12,668,133 Views
Video Unavailable
Sorry, this video could not be played.
credit: Maya Marin
Step 1 Mix Concrete
Mix the concrete with water according to the manufacturer instructions.
credit: Maya Marin
Mix enough concrete to fill your larger bowl around 80 - 90%, depending on how deep you'd like your concrete bowl to be. Remember that the cement level will rise once the small bowl has been inserted to form the cavity.
credit: Maya Marin
Step 2 Pour Into Bowl Mold
In this step, you'll use both bowls to create a mold. The larger bowl will form the outer portion of your fire bowl, and the smaller bowl will form the inner cavity.
Before pouring concrete into the larger bowl, spray it generously with non-stick cooking spray. This will act as a release agent so that the mold can be easily removed once the concrete is set.
credit: Maya Marin
credit: Maya Marin
Step 3 Agitate Bowl to Release Trapped Bubbles
To force any bubbles that may be trapped within the wet concrete to rise and pop, hold the bowl at the edges and jiggle it vigorously. This will also level out the surface.
credit: Maya Marin
In addition to shaking the bowl, slap all around the sides of the bowl as well.
credit: Maya Marin
Step 4 Insert Second Bowl
Once you can no longer see bubbles rising to the surface, take your smaller bowl and spray the underside generously with cooking spray.
credit: Maya Marin
Push the second bowl straight down into the concrete mix to create a cavity and force the sides to rise.
credit: Maya Marin
The concrete will have the tendency to push your second bowl back up to the surface, so place something heavy inside the smaller bowl to weigh it down. I've used a bowl of small rocks, as this allowed me to easily adjust the amount of pressure needed by simply adding or removing rocks.
credit: Maya Marin
Step 5 Let it Set
Now it's time to let your concrete set completely. If you use quick-setting cement it will take between 24 - 48 hours. You'll know it's set once the entire bowl has lightened in color and there are no darker patches that are still pliable.
credit: Maya Marin
Step 6 Remove from Mold
Once it's set, remove the inner bowl. If you've used enough cooking spray, it should come right out.
credit: Maya Marin
Now invert it and lift off the outer bowl. Again, if you've applied enough release agent, the outer bowl should be easily removed.
credit: Maya Marin
credit: Maya Marin
Step 7 Sand to Smooth the Surface (optional)
You'll probably have some rough edges and a few crevices from bubbles that hadn't been released. You can embrace all these imperfections (it's all part of the industrial chic look!), or you can give your bowl a smoother appearance by sanding the surface.
credit: Maya Marin
credit: Maya Marin
Step 8 Make a Fuel Can Holder
In this step, you'll create a wire mesh cylinder in which you'll insert your gel fuel can. Creating a fuel holder will also make it easier for you to replace your gel fuel when a can burns out. While wearing your protective gloves (the cut wire will be very sharp!), use your cutting pliers to cut a strip of hardware cloth that will fit around the gel fuel can, with a bit of overlap.
credit: Maya Marin
Bend down the sharp edges along the length of strip before forming the cylinder to prevent getting scratched when handling it.
credit: Maya Marin
Form it into a cylinder with the edges slightly overlapping (but leave enough room to easily insert your fuel can). To connect the ends together, slip one end underneath the bent edges of the other (see below), and pinch tightly to lock the ends together.
credit: Maya Marin
credit: Maya Marin
Check for fit by sliding the fuel can inside. It should easily slip in and out.
credit: Maya Marin
Step 9 Add Gravel and Gel Fuel Can
Add a thin layer of gravel to the bottom of the bowl and insert the wire mesh cylinder.
credit: Maya Marin
credit: Maya Marin
Place the gel fuel can inside the cylinder. The top of the can should be more-or-less flush with the top edge of the cylinder. If not, remove it and add/take away gravel underneath the gel fuel can to adjust the height.
credit: Maya Marin
Step 10 Cut Mesh Cover for Fuel Can
To prevent fire glass/rocks from falling into the gel fuel, cut out a circle of wire mesh slightly larger than the fuel can to act as a cover.
credit: Maya Marin
credit: Maya Marin
Remove the lid from the gel can and place the wire mesh circle on top of the opened can.
credit: Maya Marin
Step 11 Add Fire-safe Glass or Rocks
Now it's time to top off your fire bowl with the decorative fire glass/rocks. Holding the mesh cover in place, add a layer of fire glass/rocks.
credit: Maya Marin
Clear any glass/rocks away from the gel fuel mesh -- and you're done.
credit: Maya Marin
credit: Maya Marin
Your DIY concrete fire bowl is ready to be lit and enjoyed on your outdoor coffee table, bistro/dining table, side table -- or anywhere you please!
credit: Maya Marin
credit: Maya Marin
credit: Maya Marin
Original article and pictures take www.hunker.com site
Комментариев нет:
Отправить комментарий