среда, 28 марта 2018 г.

DIY Coastal Tic-Tac-Toe

DIY Coastal Tic-Tac-Toe

Want to play a game? How about a little tic-tac-toe? In our house we play on a DIY Coastal Tic-Tac-Toe Board, complete with starfish as X’s and sand dollars as O’s. This coastal tic-tac-toe board is a pretty easy DIY project that you can knockout in an afternoon. If you own a beach house then you need this!


DIY Coastal Tic-Tac-Toe with Starfish and Sand Dollars

DIY Coastal Tic-Tac-Toe Supply List:


Some Amazon affiliate links provided for you shopping convenience.


  • 1- Pine Panel Board (15.5″ x 48″)
  • 3- Hardwood Rectangle Molding (1/4″ x 1/2″ x 4′)
  • soft rag

When deciding to make a coastal tic-tac-toe board I wanted to find a board that was wide enough to hold starfish and sand dollars,and also be inexpensive. I found a nice 4 foot long pine board at Home Depot. Now, I didn’t need 4 feet but the board was only a few dollars and would allow for any cutting mistakes or making multiple boards. This project is quite simple if you already have some power tools.


Step 1: Measure the width of the board. Take that measurement and mark it along the length of the board. Cut an exact square out of the board by using a circular saw and rafter’s square to help keep the saw straight. My board is 15.5″ x 15.5″.


diy-tic-tac-toe-step-1

square-board

Step 2:


  • Create the outside frame edge. Cut a rectangular trim piece into 4- 15.5″ lengths, and cut the ends at a 45° angle as pictured below.
  • Cut 2 – 14 3/4″
  • Cut 6 – 4 1/2″ lengths with straight end cuts

DIY tic tac toe board pieces

Step 3:


Stream a bead of wood glue along the molding pieces. Set in place to form a frame around the board. Wipe up any leakage or glue spills with a wet cloth.


DIY coastal tic tac toe board - step 2

Step 3:


Glue the 2 inside pieces equal-distant from each other to create 3 equally spaced columns. Each column is 4 1/2″ inches wide.


DIY coastal tic tac toe board - step 3

Step 4:


Glue in the 4 1/2″ spacers to create a grid pattern.


DIY tic tac toe board step 4

Step 5:


This is up to you! Paint the board, stain the board, or leave it as is. I used Minwax Classic Gray stain for my Coastal Tic-Tac-Toe board. I used a foam brush to apply the stain, left it for 5 minutes and then wiped off the excess stain with a soft cloth. The stain can be a bit strong smelling so leave it outside to dry and air out for a few hours. I added a few foam pads to the underside of the board.


DIY Coastal Tic-Tac-Toe with Starfish and Sand Dollars

Choose 5 starfish and 5 sand dollars to play the coastal tic-tac-toe game.


DIY Coastal Tic-Tac-Toe with Starfish and Sand Dollars

I hope you will make a board for yourself or make one as a gift. The DIY Coastal Tic-Tac-Toe board is so pretty as a coastal decor item and can add to a fun game night for the family! To see more of our recent nautical media room makeover click here.


Wishing you a fun family game night!


KIM


Original article and pictures take www.sandandsisal.com site

Комментариев нет:

Отправить комментарий